EVEAGE 15″ Pressure Washer Surface Cleaner

$129.99

Buy Now

Description

  • EASY TO OPERATET: The pressure washer surface cleaner attachment is installed with 4 wheels that make maneuvering it effortless and flexible on large area. Tough flexible bristles to protect surfaces from damage and keep the water spray contained underneath the unit that your feet and legs don’t get covered in grime and muck from the surface, no rocks or debris fly up in your face. IMPROVE YOUR PRESSURE WASHING EXPERIENCE.
  • TIME SAVING AND COMPATIBILITY:Surface cleaner for pressure washer gives a commercial grade cleaning area of 15” wide, compatible with pressure washers up to 2000-4000 PSI. Ideal for cleaning stubborn stains on large flat surfaces such as patios, driveways, decks, sidewalks. Flow rate 1.8-4.5 GPM.
  • EFFICIENT CLEANING: Integrated rotary rod with dual high-pressure rotating jets clean up to 6X faster, that breaking up dirt and grime fastly without leaving marks on the surface. Compatible with 1/4 inch quick-connect capable wandn, the Surface Cleaner can be used with most gasoline pressure washers.
  • PROFESSIONAL AFTERSALES SERVICE: If you have any questions, please feel free to contact the after sales services. Notes: NOT FIT GARDEN HOSE OR WATER HOSE.
driveway pressure washer

15” Pressure Washer Surface Cleaner , Stainless Steel Housing & 1/4″ Quick Connector

Features

Inlet: 1/4″ Quick plug.

The Surface Cleaner can be used with most gasoline pressure washers with up to 4000 PSI, min pressure 2000 PSI, min flow rate 1.8 GPM, max flow rate 3.7 GPM.

Use on horizontal surfaces like driveways, patios, sidewalk, etc.

Use on vertical surfaces like brick walls, stucco and other siding (Always test in inconspicuous area first. The Surface Cleaner has not been designed for commercial use.

Compatible machines: g2700, g2700r, g2900x, g3000, g3000k, g3000x.

concrete power washer

Issue1: Nozzle Blockage

If the jet arm did not spin or pass water through nozzles, maybe the nozzles are blocked with sand or other debris. Please clean the nozzle by using nozzle cleaner or replace the nozzle.

If the jet arm doesn’t spin or no water come from the nozzles.

Step 1. Remove the blocked nozzle with a wrench.

Step 2. Rinse with water. (If you do not want to replace the nozzle, please use nozzle cleaner to clean the nozzle.)

Step 3. Install the replacement nozzle covered with Thread Seal Tape.

Issue 2:Top Leaks

In a few cases, the top of surface cleaner will leak after prolonged use. Please replace the o-rings.

Step 1: Remove the screw by using a hex wrench.

Step 2: Replace the damaged O-rings with new ones.

pressure cleaning driveway
surface cleaner for a pressure washer

High pressure in Surface Cleaner area. Risk of injury caused by improperly locked Surface Cleaner connection.

Make sure you hear the “click” when inserting the Surface Cleaner tip into the quick connection.

 Pull the Surface Cleaner to make sure it is seated properly before operating your unit.

FEATURED VIDEOS

Lasted Products