Introduction
Pressure washers are an essential tool for car washes, but they can be very expensive. However, the right pressure washer will save you time and money over the years.
The size of pressure washer you will need to wash your car depends on the size of the car and how badly it is soiled.
To answer this question, you have to know how to determine the size of a pressure washer. There are 3 different types:
-
Small: up to 1,200 PSI (pounds per square inch) or 2.1 bar
-
Medium: up to 2,000 PSI or 3.3 bar
-
Large: over 2,000 PSI or 3.3 bar
The size of pressure washer you will need depends on the size of your car and how badly it is soiled. For example: an average sedan would take a medium sized pressure washer, while a large SUV would probably require a large-sized model. If you want to wash your car with just water alone then any type will work for this task but if you plan on using detergent then only use detergents that recommend approximating soap ratios for your particular model (sometimes included in instructions).
Usually, a 1700 PSI (pounds per square inch) or less pressure washer will be sufficient to clean a dirty car.
Usually, a 1700 PSI (pounds per square inch) or less pressure washer will be sufficient to clean a dirty car. If you have a large car that is very dirty, you may need to rent from your local hardware store or home improvement center. Renting one is more expensive than buying one and it takes more time for someone else to set it up for you; however, if you don’t have the time or money to buy one then renting is the way to go.
Anything more powerful is overkill and may damage your paint job.
You should also note that if you are not sure about the PSI, go for lower PSI. You can always add more pressure later, but you can’t take it away.
Anything more powerful is overkill and may damage your paint job. So if you’re unsure of what’s best for your car washing needs, err on the side of caution and choose a unit with less than 1200 PSI.
If you’re not sure, go for the lower PSI washer.
If you’re not sure, go for the lower PSI washer. The higher the PSI, the more powerful the washer and the more likely you are to damage your car. On average, a car wash should use between 2000-4000 psi of pressure. This can be determined by reading your car’s owner manual or by looking at its tire pressure specifications. If you want to avoid damaging your car during a wash then we recommend going for one with a low PSI when compared with other options available on online marketplaces like Amazon or eBay (which usually have no ratings). The lower end of this scale is usually around 1000 – 1200 PSI but this still gets rid of most dirt from cars without being too aggressive towards paintwork!
A mid-range electric pressure washer will usually be good enough for most car wash jobs.
A mid-range electric pressure washer is a variable-pressure machine that offers between 1,500 and 2,200 PSI. It’s perfect for washing cars and other small jobs around the house.
If you want to get into the nitty-gritty of pressure washers (and who doesn’t?), then you should know that PSI stands for pounds per square inch: it measures how much force is being applied when water is pumped through the wand. A high-powered model will have a maximum output of 3,000 PSI while a low-powered one runs at only 1,500 PSI or less. A mid-range model like this one will give you plenty of juice to tackle most chores around your home or business—but if your needs are more demanding than what an electric model can offer by itself (like attacking thick grease with detergents), then we recommend investing in either an outdoor extension cord reel or an outdoor generator instead so that you can connect your pressure washer directly to them without worrying about tripping over power cords!
Conclusion
In conclusion, you’ll want to purchase a pressure washer that is powerful enough to clean your car but not too powerful. A mid-range electric pressure washer will usually be good enough for most car wash jobs.
